BIOPURE 60/120
Cost-effectively provides 60 or 120 liters/hr of biopure water.
The BIOPURE 60/120 ensures a continual supply of purified water for installations such as single washer disinfectors and endoscope reprocessors.


"In the past our dental clinics used to buy bottled sterile water to supply their ultrasonic baths and sterilisers. I was determined to getaway from the storage problems, so I asked our capital programme manager, Gary White, to find an alternative. ELGA BIOPURE was the solution."

Features
- Reliable water quality – unique disinfection design for purification of RO membranes as well as the local distribution loop
- Guaranteed bacterial specification, provided by integrated purification technologies combined with easy system disinfection
- Space saving – “all in one” design allows easy under-bench installation
- Economic design – unique “wrap around” reservoir
- Unique system operation protection using automated alarms and access to important control systems limited by “E-key”

Tech Specs
PRODUCT SPECIFICATIONS | BIOPURE 60/120 |
---|---|
Dispense flowrate | 60, 120 l / h |
Inorganics (resistivity at 25°C) | <30 μS / cm or <5 μS / cm * |
Bacteria | < 1 CFU / 10ml |
Bacterial endotoxin | <0.25 EU / ml |
Delivery flow rate | Up to 10 l / min at 1.5 bar |
PRODUCT SPECIFICATIONS | BIOPURE 60/120 |
---|---|
Dispense flowrate | 60, 120 l / h |
Inorganics (resistivity at 25°C) | <30 μS / cm or <5 μS / cm * |
Bacteria | < 1 CFU / 10ml |
Bacterial endotoxin | <0.25 EU / ml |
Delivery flow rate | Up to 10 l / min at 1.5 bar |

Consumables

High levels of organics and inorganics remain in the water reducing the functional life of the DI pack

High levels of organics and inorganics remain in the water reducing the functional life of the DI pack

Chlorine, chloarmine and organics remain, increasing the burden on downstream consumables which will need more frequent and expensive changes

Chlorine, chloarmine and organics remain, increasing the burden on downstream consumables which will need more frequent and expensive changes

Uncontrolled bacterial contamination and TOC levels are not reduced

FAQs
- What is BIOPURE?
BIOPURE is a water purification system providing RO and Type 2 water with a 0.25 micron endotoxin specification. BIOPURE has optional consumables which enable the product to meet your water quality needs.
- Why do you need an endotoxin spect with RO and type 2 water?
Some applications do not require high water quality (with regards to ionic water content), however, the presence of bacteria and endotoxins can have detrimental effects on results. Biopure is especially useful for feeding washers.
- What is BIOPURE 60/120?
BIOPURE 60/120 is the intermediate product in the BIOPURE range with an integrated 50L reservoir it produces 60-120 litres per hour of purified water.

Related Content

Case Studies
Don’t take our word for it, check out some of our case studies and then get in touch with us.

Ultrapure Water
Our ultrapure water does not contain any detectable endotoxins. This level of purity makes it a perfect reagent for laboratory work.